21 March 2019
Mar 21, 2019 18:24:41 GMT -8
Post by K6KD on Mar 21, 2019 18:24:41 GMT -8
N0RSR: With the DVMEGA, can you have 2 modes at once going or does it need to be one or the other? i'm guessing it's a single mode at a time
KK6MYS: I just switch over to pi-star from dstar commander after my sd card went. I notice that on the constellation my call sign is announced every 10 or so minutes. Is this happening to anyone else using pi-star on the constellation?
KK6MYS: If yes is it something I can turn off on my end?
k6jm: Question about DMR ids (also used for D-Star CCS7 callsign routing) - Got my DMR ids a long time ago. I understand with various changes North American hams should now go to www.radioid.net/. Has anyone does this recently?
k6jm: New process to get a new DMR id -- do you need to prove you have an amateur radio license?
N0RSR: Sorry for the possibly repeated question/topic, still the noob with D-Star
KK6MYS: Im using Pi-Star with a DVAP
KK6MYS: I found the expert part of the setting, Where do I turn it off?
KK6MYS: Not using MMDVM host
KK6MYS: K6JM thank you. Standing by...
KK6MYS: Thank you W6KD, I found it and will change it after then RT. Don't want to mess up my recording of the RT.
N0RSR: I'll be looking into DMR in a couple weeks, still playing with/learning D-star and fusion.
kc9sio: Mike, you sound like you're in a barrel, and your audio is low.
k6jm: When WB5EKU gets back on the net, he can tell us about his many callsigns and DMR ids. I have 1 personal callsign and 1 club callsign, so I have only 2 DMR ids. Both are 7-digit. I can see on DMR Brandmeister, adding a 2-digit unique-ifier makes sense.
k6jm: I agree with KC9SIO about Mike's audio sounding like in an echo chamber. I strongly suspect the mike on the boom is not active, and there is some other mike in the shack that we are hearing. Mike -- tap on the boom mike itself, not the boom.
N6HKH: I know. Unfortunately I cannot do much about it now.
N0RSR: The RadioID.net account creation verification email came back quickly, but the DMR assignment hasn't shown up yet.
k6jm: W4GMI has a tech question, Mike....
N0RSR: Windows updates this past week, most likely MS thought the device driver needed update...
k6jm: Question about DVRPTRv1 to DR-1X - check out www.hke.no/d-star-on-fusion.html
VA3TWT: I have the schematic for the DVRPTR v1 board, but didn't get the email address to send it to. Let me know and I will scan it.
KK6MYS: I just switch over to pi-star from dstar commander after my sd card went. I notice that on the constellation my call sign is announced every 10 or so minutes. Is this happening to anyone else using pi-star on the constellation?
KK6MYS: If yes is it something I can turn off on my end?
k6jm: Question about DMR ids (also used for D-Star CCS7 callsign routing) - Got my DMR ids a long time ago. I understand with various changes North American hams should now go to www.radioid.net/. Has anyone does this recently?
k6jm: New process to get a new DMR id -- do you need to prove you have an amateur radio license?
N0RSR: Sorry for the possibly repeated question/topic, still the noob with D-Star
KK6MYS: Im using Pi-Star with a DVAP
KK6MYS: I found the expert part of the setting, Where do I turn it off?
KK6MYS: Not using MMDVM host
KK6MYS: K6JM thank you. Standing by...
KK6MYS: Thank you W6KD, I found it and will change it after then RT. Don't want to mess up my recording of the RT.
N0RSR: I'll be looking into DMR in a couple weeks, still playing with/learning D-star and fusion.
kc9sio: Mike, you sound like you're in a barrel, and your audio is low.
k6jm: When WB5EKU gets back on the net, he can tell us about his many callsigns and DMR ids. I have 1 personal callsign and 1 club callsign, so I have only 2 DMR ids. Both are 7-digit. I can see on DMR Brandmeister, adding a 2-digit unique-ifier makes sense.
k6jm: I agree with KC9SIO about Mike's audio sounding like in an echo chamber. I strongly suspect the mike on the boom is not active, and there is some other mike in the shack that we are hearing. Mike -- tap on the boom mike itself, not the boom.
N6HKH: I know. Unfortunately I cannot do much about it now.
N0RSR: The RadioID.net account creation verification email came back quickly, but the DMR assignment hasn't shown up yet.
k6jm: W4GMI has a tech question, Mike....
N0RSR: Windows updates this past week, most likely MS thought the device driver needed update...
k6jm: Question about DVRPTRv1 to DR-1X - check out www.hke.no/d-star-on-fusion.html
VA3TWT: I have the schematic for the DVRPTR v1 board, but didn't get the email address to send it to. Let me know and I will scan it.