|
Post by K6KD on Oct 25, 2017 22:27:21 GMT -8
The Constellation XRF reflectors (XRF002, XRF310, and XRF555) all have 26 modules, A-Z. The traditional, non-Constellation XRF reflectors only allow Modules A-D for communication and Module E for echo testing.
|
|
|
Post by ed2196 on Nov 17, 2017 11:15:32 GMT -8
HI...
I just finished connecting to all 26 modules but only on XRF555. No problems.
When I get more time I'll try the other reflector modules...
73
Ed WA9MNF
|
|
|
Post by K6KD on Nov 17, 2017 15:18:41 GMT -8
HI... I just finished connecting to all 26 modules but only on XRF555. No problems. When I get more time I'll try the other reflector modules... 73 Ed WA9MNF Hi Ed, Thanks. If you can connect to any of the higher modules on any of the constellation reflectors, you should be good on all. 73 John K6KD
|
|
N1PEB
New Member
Posts: 38
|
Post by N1PEB on Nov 18, 2017 3:34:46 GMT -8
Hi John - need clarification, are you asking if users with a radio and hotspot can connect to the various modules or if a d-star repeater admin can link their system to any module?
|
|
|
Post by K6KD on Nov 23, 2017 21:07:14 GMT -8
Hi John - need clarification, are you asking if users with a radio and hotspot can connect to the various modules or if a d-star repeater admin can link their system to any module? Hi Paul, Sorry for the late reply. I was specifically thinking about hotspots, so that's what the poll question is for. But the question is also relevant for repeater admins, so maybe the best way to cover that is with individual posts in this thread. John
|
|
N1PEB
New Member
Posts: 38
|
Post by N1PEB on Nov 24, 2017 9:34:18 GMT -8
Hi John - Just voted - I went through and linked to several modules on XRF 002 and XRF 310 using the PiStar Dashboard without any issues. Also tried using DTMF to link to a few other models and no problem. Currently testing out PiStar with my DVAP & Pi config. I like the Dashboard, provides another method to connect to reflectors and also see list of last heard.
Paul
|
|
K1MAV
New Member
Posts: 3
|
Post by K1MAV on Jan 18, 2018 21:36:00 GMT -8
I can connect to all the modules via ThumbDV+BlueDV for Windows.
|
|