3 December 2015
Dec 3, 2015 23:18:58 GMT -8
Post by K6KD on Dec 3, 2015 23:18:58 GMT -8
Bernie - KB5YBH: What is a good website to read to understand how to use the western d-star software on the Raspberry PI? I don't know how to connect to an xref for example. 3 hours ago x
W6KD: Ports and modules as they relate to gateways/repeaters and reflectors 2 hours ago x
W6KD: The difference between simplex and duplex/no offset on an Icom DStar radio 2 hours ago x
W6KD: management of hotspot RF signal strength and input attenuation using antenna placement and orientation 2 hours ago * x
wa6jfk: I tried getting in both times, but got stomped oy.... 2 hours ago x
wa6jfk: I would like to remind people the importance of properly registering their call sign on the dstar network before the operate. 2 hours ago x
W6KD: @bernie try dstar101.com 2 hours ago x
KB5YBH: I will, Thanks. 2 hours ago x
AG6WK: Best Practices for setting up and using multiple hot spots simultaneously mainly at a static location (qth) including band, simplex frequency, power, antenna placement, physical location of mobile radio hotspot and wired/wirleless network if applicable. 2 hours ago x
wa6jfk: KB5YBH you should put an email address at qrz.com 2 hours ago x
w6jfc: Mike - D10C Palomar is unlinked and no repair at the moment. 2 hours ago x
N6HKH: Roger re D10. 2 hours ago x
AG6WK: Any recommendations on monitoring or changing selected hot spot frequencies specifically when interference occurs possibly in very active rf locations that could possibly interfere with ham radio uhf/vhf operation. 2 hours ago x
N5RWL: The D-STAR InfoCon training videos held every year at the Dayton Hamvention are some of the best introductory videos for D-STAR: dstarinfo.com/conferences.aspx 2 hours ago x
N5RWL: The most recent D-STAR InfoCon training videos are from the 2015 Hamvention here: dstarinfo.com/d-star-infocon--dayton-hamvention-2015.aspx 2 hours ago x
N6HKH: Am I "wobbly" or otherwise having audio problems? about an hour ago x
N6HKH: Barry AG6WK thanks for taking NC during the urgent phone call I had to take. about an hour ago x
AG6WK: I heard a slight "wobbly" right at the beginning but you sound solid now. 57 minutes ago x
AG6WK: Your welcome and glad your back! 57 minutes ago x
Kc2idb: Don't have time as I am at work. But wanted to report 2 things. 1. Every time I key the dv4m it disconnects me from the reflector. 2. I can now hear rf repeater stations using the latest test version. 46 minutes ago x
VE7LEE: Ve7lee is listening 41 minutes ago x
Kc2idb: Nvm on number 1. Had wrong thing in ur field. 41 minutes ago x
AG6WK: KC2IDB good to know the latest version confirms that the DV4Mini works with DPLUS (I think that was related to the ICOM G2 Software?) 40 minutes ago x
VE7LEE: Is there a standard VHF and UHF for DSTAR simplex? If so what is it? 39 minutes ago x
AG6WK: In anticipation of the Kenwood triband and DSTAR on 220mhz what DSTAR hotspot hardware is 220mhz capable today (GMSK hardware?) and will there be any DSTAR thumb drive usb like devices that will support 220mhz in time for the kenwood release or thereafter? 34 minutes ago x
VE7LEE: What reflector and time can we find Santa Claus on? ON 20 M he is at 14.300 MHz on 75 M he is 3916kHz 33 minutes ago x
VE7LEE: 14300.net/santainfo.htm 33 minutes ago x
VE7LEE: Would be nice if Santa was on DSTAR. 31 minutes ago x
VE7LEE: On DMR i use 446.100 MHz CC 1 TS 1 30 minutes ago x
AG6WK: Interesting.. For 220mhz Simplex frequencies looking in the Orange paperback ( purchased at HRO ) Southern California Repeater Location Guide there is only one (223.500) Simplex frequency identified. I wouldn't say that this is official.
W6KD: Ports and modules as they relate to gateways/repeaters and reflectors 2 hours ago x
W6KD: The difference between simplex and duplex/no offset on an Icom DStar radio 2 hours ago x
W6KD: management of hotspot RF signal strength and input attenuation using antenna placement and orientation 2 hours ago * x
wa6jfk: I tried getting in both times, but got stomped oy.... 2 hours ago x
wa6jfk: I would like to remind people the importance of properly registering their call sign on the dstar network before the operate. 2 hours ago x
W6KD: @bernie try dstar101.com 2 hours ago x
KB5YBH: I will, Thanks. 2 hours ago x
AG6WK: Best Practices for setting up and using multiple hot spots simultaneously mainly at a static location (qth) including band, simplex frequency, power, antenna placement, physical location of mobile radio hotspot and wired/wirleless network if applicable. 2 hours ago x
wa6jfk: KB5YBH you should put an email address at qrz.com 2 hours ago x
w6jfc: Mike - D10C Palomar is unlinked and no repair at the moment. 2 hours ago x
N6HKH: Roger re D10. 2 hours ago x
AG6WK: Any recommendations on monitoring or changing selected hot spot frequencies specifically when interference occurs possibly in very active rf locations that could possibly interfere with ham radio uhf/vhf operation. 2 hours ago x
N5RWL: The D-STAR InfoCon training videos held every year at the Dayton Hamvention are some of the best introductory videos for D-STAR: dstarinfo.com/conferences.aspx 2 hours ago x
N5RWL: The most recent D-STAR InfoCon training videos are from the 2015 Hamvention here: dstarinfo.com/d-star-infocon--dayton-hamvention-2015.aspx 2 hours ago x
N6HKH: Am I "wobbly" or otherwise having audio problems? about an hour ago x
N6HKH: Barry AG6WK thanks for taking NC during the urgent phone call I had to take. about an hour ago x
AG6WK: I heard a slight "wobbly" right at the beginning but you sound solid now. 57 minutes ago x
AG6WK: Your welcome and glad your back! 57 minutes ago x
Kc2idb: Don't have time as I am at work. But wanted to report 2 things. 1. Every time I key the dv4m it disconnects me from the reflector. 2. I can now hear rf repeater stations using the latest test version. 46 minutes ago x
VE7LEE: Ve7lee is listening 41 minutes ago x
Kc2idb: Nvm on number 1. Had wrong thing in ur field. 41 minutes ago x
AG6WK: KC2IDB good to know the latest version confirms that the DV4Mini works with DPLUS (I think that was related to the ICOM G2 Software?) 40 minutes ago x
VE7LEE: Is there a standard VHF and UHF for DSTAR simplex? If so what is it? 39 minutes ago x
AG6WK: In anticipation of the Kenwood triband and DSTAR on 220mhz what DSTAR hotspot hardware is 220mhz capable today (GMSK hardware?) and will there be any DSTAR thumb drive usb like devices that will support 220mhz in time for the kenwood release or thereafter? 34 minutes ago x
VE7LEE: What reflector and time can we find Santa Claus on? ON 20 M he is at 14.300 MHz on 75 M he is 3916kHz 33 minutes ago x
VE7LEE: 14300.net/santainfo.htm 33 minutes ago x
VE7LEE: Would be nice if Santa was on DSTAR. 31 minutes ago x
VE7LEE: On DMR i use 446.100 MHz CC 1 TS 1 30 minutes ago x
AG6WK: Interesting.. For 220mhz Simplex frequencies looking in the Orange paperback ( purchased at HRO ) Southern California Repeater Location Guide there is only one (223.500) Simplex frequency identified. I wouldn't say that this is official.