28 December 2017
Dec 28, 2017 19:29:03 GMT -8
Post by K6KD on Dec 28, 2017 19:29:03 GMT -8
N6HKH: What? No posts? Must be a conspiracy.
kc9sio: Good evening.
kg5tnk: D-STAR Users FB page is GREAT! It helped me configure both my Pi-Star hotspot for the XLx313 conntection, but also directed someone else to it to get them connected. Support here is GREAT!
KG5SLG: Thanks to KG5TNK for telling me about the link for DMR to XLX crossover with a pi-star, the link can be found under the facebook Pi-Star users in the file section called Configure dmr hotspot lookaside.fbsbx.com/file/Config%20DMR%20Hotspot.pdf
KG5SLG: Oops sorry you have to belong to the group
KG5SLG: IC-92AD to link to the Raspberry PI3 running a DVMEGA with the pi-star image and Nextion Screen
KG5SLG: That is what I got for christmas
K6KD: Video on Nano-Spot www.youtube.com/watch?v=rQAMqKKW5p0
KG5SLG: You can also name the hotspot your on your phone the same as the router and give it the same name so you can transfer without any issues
KG5SLG: sorry mike appears my power supply giving me an issue
KG5SLG: I will be back
N6HKH: No problem. Key back up when remedied if you'd like.
kg5tnk: I have a question for the Nano Spot fella! Is there a way to set WiFi priorities with it. I have recently had an issue with that via the Raspberrly Pi, but found a resolution.
n1dot: yes the scanning is done in order of priority defined in the wpa_supplicant file
n1dot: wpa_supplicant.conf file
n1dot: what you did for the raspi wpa_supplicant.conf file will also working on the nano-spot too is also use the pi-star image
n1dot: with the wpa_supplicant.conf file
VE7LEE: for 2017, was the year the BrandMester took over DMR in users compare to DMARC
VE7LEE: G3 a waste of time and effort
kg5tnk: n1dot...I know full well how to configure the priority via the Pi-Star image... for I have done so withe successs...I am wondering, before I drop the cash for the Nano Spot, can I do the same... Reasons for it are multiple..
kg5tnk: n1dot: You have answered my question already. The same edit will solve my proble...TY!4
n1dot: i have the nano-spot and works the as my mmdvm image of pi-star as far the wifi is concerned.
n1dot: i have mmdvm full duplex repeater using a dr-1x here in my shack
n1dot: hi mike the next thing jonathan is going to do is add nxdn (kenwood) mode to mmdvm.
n1dot: jonathan has a kenwood commercial radio that does nxdn now as well as dmr
n1dot: that will allow use to use an icon idas radio or a kenwood nxdn radio.
n1dot: with mmdvm
n1dot: g4klx is quite active on p25 also
n1dot: i have ran into him on p25
n1dot: north america reflector
N6HKH: Here's what we're talking about generally w/links for more: nwdigitalradio.com/kickstarter-for-a-6-channel-usb-ambe-device/
W6KD: Speaker shopping... www.youtube.com/watch?v=19CvEO3Riy0&lc=Ugy8CJvWA3dtQgs5t_R4AaABAg
n1dot: link for mmdvm oard from repeater bulder
n1dot: www.repeater-builder.com/products/stm32-dvm.html
kc9sio: Good evening.
kg5tnk: D-STAR Users FB page is GREAT! It helped me configure both my Pi-Star hotspot for the XLx313 conntection, but also directed someone else to it to get them connected. Support here is GREAT!
KG5SLG: Thanks to KG5TNK for telling me about the link for DMR to XLX crossover with a pi-star, the link can be found under the facebook Pi-Star users in the file section called Configure dmr hotspot lookaside.fbsbx.com/file/Config%20DMR%20Hotspot.pdf
KG5SLG: Oops sorry you have to belong to the group
KG5SLG: IC-92AD to link to the Raspberry PI3 running a DVMEGA with the pi-star image and Nextion Screen
KG5SLG: That is what I got for christmas
K6KD: Video on Nano-Spot www.youtube.com/watch?v=rQAMqKKW5p0
KG5SLG: You can also name the hotspot your on your phone the same as the router and give it the same name so you can transfer without any issues
KG5SLG: sorry mike appears my power supply giving me an issue
KG5SLG: I will be back
N6HKH: No problem. Key back up when remedied if you'd like.
kg5tnk: I have a question for the Nano Spot fella! Is there a way to set WiFi priorities with it. I have recently had an issue with that via the Raspberrly Pi, but found a resolution.
n1dot: yes the scanning is done in order of priority defined in the wpa_supplicant file
n1dot: wpa_supplicant.conf file
n1dot: what you did for the raspi wpa_supplicant.conf file will also working on the nano-spot too is also use the pi-star image
n1dot: with the wpa_supplicant.conf file
VE7LEE: for 2017, was the year the BrandMester took over DMR in users compare to DMARC
VE7LEE: G3 a waste of time and effort
kg5tnk: n1dot...I know full well how to configure the priority via the Pi-Star image... for I have done so withe successs...I am wondering, before I drop the cash for the Nano Spot, can I do the same... Reasons for it are multiple..
kg5tnk: n1dot: You have answered my question already. The same edit will solve my proble...TY!4
n1dot: i have the nano-spot and works the as my mmdvm image of pi-star as far the wifi is concerned.
n1dot: i have mmdvm full duplex repeater using a dr-1x here in my shack
n1dot: hi mike the next thing jonathan is going to do is add nxdn (kenwood) mode to mmdvm.
n1dot: jonathan has a kenwood commercial radio that does nxdn now as well as dmr
n1dot: that will allow use to use an icon idas radio or a kenwood nxdn radio.
n1dot: with mmdvm
n1dot: g4klx is quite active on p25 also
n1dot: i have ran into him on p25
n1dot: north america reflector
N6HKH: Here's what we're talking about generally w/links for more: nwdigitalradio.com/kickstarter-for-a-6-channel-usb-ambe-device/
W6KD: Speaker shopping... www.youtube.com/watch?v=19CvEO3Riy0&lc=Ugy8CJvWA3dtQgs5t_R4AaABAg
n1dot: link for mmdvm oard from repeater bulder
n1dot: www.repeater-builder.com/products/stm32-dvm.html